Image default

Pool maintenance mistakes to avoid

One of the luxurious things you can have in your property or home is a swimming pool. This works so well when the sun is up and temperatures are high. However, it is prone to dirt and waterborne disease and therefore must be cleaned regularly.  Ignoring your pool can lead to an outbreak of a disease, something you don’t want.

There are many other mistakes regarding pool maintenance that you should avoid

Not brushing your pool

The pool tiles and walls need regular brushing to eliminate calcium deposits and algae from forming. Things like calcified plaque are hard to remove and thus will require an expert to take them off. Areas around the pool that have minimal circulation like corners, stairs, and ladders should be brushed manually. As part of your weekly maintenance routine, brushing should be done on top of regular vacuuming and skimming.

Not checking calcium levels

Another important step in pool maintenance after checking the PH is monitoring the calcium hardness. With low calcium in your pool, the water may appear clear but the pool surfaces could be corroding. A high amount of calcium-which are commonly known as hard water creates problematic scaling from calcium deposits. Calcium levels unlike PH change over a long period and thus monthly checks will keep you on top of things. Anytime you’re making significant changes in your pool, ensure you do a calcium test.

Not testing the water

Water is the most important component of the pool and therefore you must ensure regular testing. Testing should be done at least once in a week and if in optimal use, this can be done more often. Regular testing ensures that the PH levels are at an ideal pH level of 7.5. High PH would lead to skin irritation and scales formation due to acidity.

Not draining your pool

You may have everything else done right; water balance, regular chlorination, shocks, and such. However, you need to check the total dissolved solids (TDS). These are caused by sunscreen, chemicals, organic debris, sweat, and anything else that finds its way into the pool.  Check the levels every six months and if the levels are too high, then you’ll need to drain your pool. Draining is normally done in 4-5 years but annual checks will ensure that the TDS is not at high levels.

Not backwashing often

For you to maintain clean water in the pool, you have o always clean the debris, algae, and other contaminants. Backwashing involves cleaning your pool water by reversing the flow valves and allowing a thorough run through. If your pool is in heavy use, backwashing should be done every week after vacuuming it, a process that takes approximately 3 minutes. The filter should also be cleaned chemically many times throughout the season. You also need to continually check the pressure gauge and psi level. When the pressure is 8-10 psi, it indicates that you need a backwash.

Not running the pump

One of the most effective ways to keep your pool clean is to keep your water fresh and flowing. Ensure you run the pump at least eight hours in every 24 hours of regular use. Ensure the pump is working properly always. Nice water flow in the pool ensures there is no algae build-up and therefore vacuums and filters can do their job optimally.

The little things that you ignore when it comes to pool maintenance matter a lot and if ignored, can cost you big time. To ensure proper maintenance, you need a natural hot tub water cleaner service that is reliable and one that offers quality services at affordable fees.

Related posts

4 Questions to Ask When Choosing an Air Conditioner Installation Company

Laura Peter

3 Indisputable Reasons Why Sectional Homes Are Better Than Traditional Construction

Laura Peter

Five Benefits of Regular Septic Maintenance in Albany

Laura Peter